Infineon Technologies EVAL-M1-6ED2230-B1 Evaluation Board
Infineon EVAL-M1-6ED2230-B1 EiceDRIVER™ Gate Driver IC Evaluation Board offers a compatible power board for the iMOTION™ MADK (Modular Application Design Kit) for motor control.
The MADK platform is designed for use with various power stages and different control boards, including the Eval-M1-099M-C or Eval-M1-1302. These boards can easily be interfaced via the 20-pin M1 interface connector to the power boards.
The EVAL-M1-6ED2230-B1 Evaluation Board is intended to give comprehensible power-stage solutions featuring the EiceDRIVER gate driver IC and EasyPIM™ 1B power module. The Board features AC and DC inputs and provides a 3-phase power output. Furthermore, the device contains a single emitter shunt for current sensing and a voltage divider for DC-link voltage measurement.
Features
- Infineon Thin-Film-SOI technology
- Fully operational to +1200V
- Integrated Ultra‐fast Bootstrap Diode and OCP
- Floating channel designed for bootstrap operation
- Output source/sink current capability +0.35A/‐0.65A
- Tolerant to negative transient voltage up to -100V (Pulse width is up 700ns) given by SOI technology
- Undervoltage lockout for both channels
- 3.3V, 5V, and 15V input logic compatible
- Over current protection with ±5% ITRIP threshold
- Fault reporting, automatic Fault clear, and Enabled function on the same pin (RFE)
- Matched propagation delay for all channels
- Integrated 460ns deadtime protection
- Shoot-through (cross-conduction) protection
- 1200V, 15A three-phase input rectifier PIM (Power Integrated Modules) IGBT module
- Fast TRENCHSTOP™ IGBT4, Emitter Controlled 4 diode, and NTC
- Low switching losses
- VCEsat with a positive temperature coefficient
- Low VCEsat
- Al2O3substrate with low thermal resistance
- Compact design
- Solder contact technology
- Rugged mounting due to integrated mounting clamps
Specifications
- 6ED2230S12T and FP15R12W1T4 configuration
- AC/DC input type
- 2000.0W Pout max
- Industrial qualification
- 200.0V min - 800.0V max supply voltage
- 3-Phase motor topology
- Up to 2kw motor power range
- On-board overcurrent protection
- FP15R12W1T4 15A (TC = 100°C) EasyPIM power module
- RoHS compliant
- PCB is 130 x 120mm and has two layers with 35μm copper each
Applications
- Heating ventilation and air conditioning HVAC
- Motor control and drives
- HVAC pumps
- HVAC ventilation
Layout
Associated Products
Infineon Technologies 6ED223xS12T EiceDRIVER™ Gate Driver ICs
High voltage, high-speed IGBTs with 3x high-/low-side referenced output channels for 3-phase apps.
Infineon Technologies Módulo IGBT EasyPIM™
Módulo IGBT PIM con rectificador de entrada trifásico, con IGBT7 TRENCHSTOP™, diodo 7 controlado mediante un emisor y NTC.
Infineon Technologies FP10R12W1T7_B11 EasyPIM™ 1B IGBT Module
1200V, 10A 3-phase input rectifier PIM IGBT Module with TRENCHSTOP and an Emitter Controlled Diode.
Infineon Technologies EVAL-M1-099M Modular Application Design Kit
Development tool powered by the IRMCK099M iMOTION Motor Control IC.
Infineon Technologies iMOTION™ MADK Platform
Modular application design kit for evaluating compact and flexible 3-phase motor drives.