Volver a RECOM Power

RECOM Power RELID01/R DALI-to-Analog Control Signal Interface

RECOM Power RELID01/R DALI-to-Analog Control Signal Interface is a LIGTLINE AC/DC DALI-converter that meets or exceeds the DALI IEC62386 standard. The output is selectable between PWM, 0-10V, or 1-10V and is compatible with all RECOM power dimmable LED drivers as well as other manufacturers' products. The output can control six or more LED drivers, allowing the lighting in a whole room or office to be dimmed with just one DALI address. A built-in relay can be used to switch off the LED drivers under software control to give zero no-load consumption. The interface is AC-powered (110VAC or 230VAC) and consumes typically only 1.6W in operation.

Features

  • Compliant with DALI Standard (IEC62386 Part 102 and 206)
  • Selectable output for PWM, DC 0-10V, and DC 1-10
  • 5-year warranty
  • IP20 rating
  • Output channel short circuit protection
  • Screw-less connectors, easy to install
  • Built-in relay to turn on/off the driver completely (zero standby current)
  • RoHS compliant

Specifications

  • 90VAC to 264VAC input voltage range, 50/60Hz
  • 1.6W typical power consumption, 3W maximum
  • 2mA maximum DALI Bus current consumption
  • 22AWG to 16AWG suitable electric wire
  • 500Hz typical PWM frequency
  • 60mA PWM output current sourcing
  • -20°C to +40°C operating temperature range
  • 1-channel, 2A/7A peak relay switch
  • 150mm x 40mm x 30mm in dimension
  • 100g in weight

Videos

DALI Connection

RECOM Power RELID01/R DALI-to-Analog Control Signal Interface
Publicado: 2014-07-02 | Actualizado: 2022-03-11