Volver a Connective Peripherals

Connective Peripherals ES-DLA-8/16 Channel Logic Analyzer

Connective Peripherals ES-DLA-8/16 channel logic analyzers connect to a computer via USB. The ES-DLA-8/16 combines the functions of RAW, RLE, internal, and external clock, and 8 or 16 channels into a single instrument. The ES-DLA8/16 logic analyzers offer a maximum sampling rate of 60MHz or 4-bit RW with an external clock input, search function, zoom in/out, and full view display. Connective Peripherals ES-DLA-8/16 is powered by USB and doesn't need an external power supply. 

Features

  • 8/16 channels
  • External and internal capture clock
  • Use internal clock programmable rates up to 60MHz RLE or 4-bit raw for internal capture
  • Raw data or RLE (Run Length Encoding) data capture modes
  • 256MB samples
  • -0.5 … +5.25V DC maximum input voltage:
  • +/-20V (Not meant for continuous operation outside -0.5 to +5.25V) input over-voltage protection
  • CMOS standard voltage thresholds -0.5 to +0.8V - logic low; +2.0 to +5.25V - logic high.
  • Hardware upgradeable over USB
  • Bus powered USB interface (60mA)
  • Attractive enclosure with rubberized moldings
  • 40mm x 10mm x 53mm
  • Rising Edge, Falling Edge, High Level and Low Level Trigger modes
  • 1 billion maximum samples
  • 0%, 25%, 50%, 75% and 100% pre-trig mode
  • Zoom-in, zoom-out and full view
  • I²C, SPI, OneWire and UART trigger modes:
  • Data and condition search functions
  • Save results to CSV file
  • Save results to BMP file

Kit Contents

  • ES-DLA-8/16 logic analyzer
  • Carrying case
  • 1 USB cable
  • 1 testing cable/probe
  • Quick start guide
Publicado: 2015-06-19 | Actualizado: 2022-03-11