Volver a Banner Engineering

Banner Engineering R90C 4-Port IO-Link Master

Banner Engineering R90C-4K-MQ IO-Link Master/Modbus Converter connects four IO-Link devices and provides access through the Modbus RTU interface. This converter includes matching RGB LED indicators on both sides for each IO-Link device port for installation needs. The R90C-4K-MQ converter consists of an Amber LED indicator on both sides specific to the Modbus communication. This converter operates from 18VDC to 30VDC input voltage range, -40°C to 70°C temperature range, and 90% maximum relative humidity (non-condensing) at 70°C temperature. The R90C-4K-MQ converter is IP65, IP67, and IP68 rated.

Features

  • Connects four IO-Link devices and provides access through the Modbus RTU interface
  • 5-pin M12 male quick-disconnect connector
  • Four 4-pin M12 female quick-disconnect connectors
  • Built-in indication for four IO-Link master ports
  • Protected against reverse polarity and transient voltages
  • Built-in indication for Modbus RTU connection status
  • Rugged over-molded design meets IP65, IP67, and IP68 ratings
  • Easy installation with no assembly or individual wiring required

Specifications

  • 18VDC to 30VDC input voltage range
  • 24VDC at 4A input power
  • 400μA leakage current immunity
  • Indicators:
    • RGB1: IO-Link Port 1 status
    • RGB2: IO-Link Port 2 status
    • RGB3: IO-Link Port 3 status
    • RGB4: IO-Link Port 4 status
    • Amber: Modbus communications
  • IO-Link baud rates:
    • COM1: 4.8kbps
    • COM2: 38.4kbps
    • COM3: 230.4kbps
  • Operating conditions
    • –40°C to 70°C operating temperature range
    • 90% maximum relative humidity at 70°C (non-condensing)
  • Compliant standards:
    • IO-Link interface and system specification v1.1.2
    • IO-Link test specification v1.1.2
  • RS485 Modbus RTU
  • Digital inputs (SIO [DI] mode):
    • 5mA typical input current
    • 15VDC minimum/5mA minimum ON voltage/current
    • 5VDC maximum OFF voltage
  • Digital outputs (SIO [DO] Mode):
    • 120mΩ typical and 250mΩ maximum on-resistance
    • 0.7A minimum, 1A typical, and 1.3A maximum current limit
    • -10µA minimum and 10µA maximum off leakage current

Mechanical Diagram

Mechanical Drawing - Banner Engineering R90C 4-Port IO-Link Master

Additional Resources

Related Products

Banner Engineering R90C Converters

Features gateway devices for connecting to a Snap Signal IIoT system or Modbus control systems.

Learn Moreacerca de Banner Engineering R90C Converters View Productsrelacionado con Banner Engineering R90C Converters

Banner Engineering Remote I/O Solutions

Optimizes control system performance and simplifies system designs.

Learn Moreacerca de Banner Engineering Remote I/O Solutions View Productsrelacionado con Banner Engineering Remote I/O Solutions
Publicado: 2024-03-22 | Actualizado: 2024-05-09