Analog Devices Inc. ADC de 16 bits de muy baja potencia AD7988-x de Analog Devices

Los convertidores analógico-digital (ADC) de 16 bits de muy baja potencia AD7988-x de Analog Devices están diseñados como ADC de aproximación sucesiva de 16 bits que funcionan a partir de una única fuente de alimentación, VDD. El AD7988-1 ofrece un rendimiento de 100 kSPS mientras que el AD7988-5 ofrece un rendimiento de 500 kSPS. Estos ADC de muestro de 16 bits de baja potencia cuentan con una interfaz de puerto en serie versátil. La interfaz serie compatible ofrece la posibilidad de configurar en cadena múltiples ADC en un bus único de 3 cables usando la entrada SDI. El AD7988-1  y el AD7988-5 son compatibles con la lógica de 1,8 V, 2,5 V, 3 V o 5 V usando el suministro VIO independiente. En el borde saliente de CNV, el ADC AD7988 muestrea una entrada analógica, IN+, entre 0 V y VREF con respecto a un sentido de tierra, IN−. La tensión de referencia, REF, se aplica externamente y los diseñadores pueden fijarla de forma independiente de la tensión de alimentación, VDD. Los ADC AD7988-1/AD7988-5 se alojan en un MSOP de 10 terminales o en un QFN (LFCSP) de 10 terminales con funcionamiento entre −40 °C y +125 °C. Estos dispositivos son muy adecuados para equipos alimentados por batería, sistemas de adquisición de datos de baja potencia, sistemas de adquisición de datos sísmicos, instrumentos médicos portátiles, equipo ATE, adquisiciones de datos y comunicaciones.

These low-power, 16-bit sampling ADCs feature a versatile serial interface port. The SPI-compatible serial interface offers the ability to daisy-chain several ADCs on a single 3-wire bus using the SDI input. AD7988-1 and AD7988-5 are compatible with 1.8V, 2.5V, 3V, or 5V logic using the separate supply, VIO.

On the CNV rising edge, the AD7988 ADCs sample an analog input, IN+, between 0V to VREF with respect to a ground sense, IN−. The reference voltage, REF, is applied externally and designers can set it independent of the supply voltage, VDD. The AD7988-1/AD7988-5 ADCs are housed in a 10-lead MSOP or a 10-lead LFCSP (QFN) and operate from −40°C to +125°C.

These devices are well-suited for battery-powered equipment, low-power data acquisition systems, portable medical instruments, ATE equipment, data acquisitions, and communications.

Características

  • Low power dissipation
    • AD7988-1
      • 400μW at 100kSPS (VDD only)
      • 700μW at 100kSPS (total)
    • AD7988-5
      • 2mW at 500kSPS (VDD only)
      • 3.5mW at 500kSPS (total)
  • 16-bit resolution with no missing codes
  • Throughput: 100kSPS/500 kSPS options
  • INL: ±0.6LSB typical, ±1.25LSB maximum
  • SINAD: 91.5dB at 10kHz
  • THD: −114dB at 10kHz
  • Pseudo-differential analog input range
    • 0V to VREF with VREF from 2.5V to 5.5V
  • No pipeline delay
  • Single-supply 2.5V operation with 1.8V/2.5V/3V/5V logic interface
  • Proprietary SPI-/QSPI™-/MICROWIRE™-/DSP-compatible serial interface
  • Daisy-chain multiple ADCs
  • 10-lead MSOP and 10-lead, 3 mm × 3 mm LFCSP, same space as SOT-23
  • Wide operating temperature range: −40°C to +125°C

Aplicaciones

  • Battery-powered equipment
  • Low power data acquisition systems
  • Portable medical instruments
  • ATE equipment
  • Data acquisitions
  • Communications

Typical Application Circuit

Analog Devices Inc. ADC de 16 bits de muy baja potencia AD7988-x de Analog Devices
Publicado: 2015-03-30 | Actualizado: 2022-03-11