Accesorios SparkFun These are 6" long jumper wires with male connectors on both ends. Use these to jumper from any female header on any board to any other female header. Combine these with our female to female jumpers to create a male to female jumper. Multiple jumpers
PRT-12795
SparkFun
1:
2,54 €
241 En existencias
N.º Ref. Mouser
474-PRT-12795
SparkFun
Accesorios SparkFun These are 6" long jumper wires with male connectors on both ends. Use these to jumper from any female header on any board to any other female header. Combine these with our female to female jumpers to create a male to female jumper. Multiple jumpers
241 En existencias
Comprar
Mín.: 1
Múlt.: 1
Accesorios SparkFun These are 6" long jumper wires with female connectors on both ends. Use these to jumper from any male header on any board to any other male header. Combine these with our male to male jumpers to create a male to female jumper. Multiple jumpers can b
PRT-12796
SparkFun
1:
2,57 €
438 En existencias
N.º Ref. Mouser
474-PRT-12796
SparkFun
Accesorios SparkFun These are 6" long jumper wires with female connectors on both ends. Use these to jumper from any male header on any board to any other male header. Combine these with our male to male jumpers to create a male to female jumper. Multiple jumpers can b
438 En existencias
Comprar
Mín.: 1
Múlt.: 1
Accesorios SparkFun Alligator Test Leads Multicolored 10 pac
PRT-12978
SparkFun
1:
4,81 €
179 En existencias
N.º Ref. Mouser
474-PRT-12978
SparkFun
Accesorios SparkFun Alligator Test Leads Multicolored 10 pac
179 En existencias
Comprar
Mín.: 1
Múlt.: 1
Accesorios SparkFun Snappable Protoboard Protoboard
PRT-13268
SparkFun
1:
12,30 €
13 En existencias
26 Fecha prevista: 08/09/2026
N.º Ref. Mouser
474-PRT-13268
SparkFun
Accesorios SparkFun Snappable Protoboard Protoboard
13 En existencias
26 Fecha prevista: 08/09/2026
Comprar
Mín.: 1
Múlt.: 1
Detalles
Accesorios SparkFun Enclosure-Aluminum 120x94.5x34mm
PRT-13838
SparkFun
1:
8,16 €
15 En existencias
N.º Ref. Mouser
474-PRT-13838
SparkFun
Accesorios SparkFun Enclosure-Aluminum 120x94.5x34mm
15 En existencias
Comprar
Mín.: 1
Múlt.: 1
Accesorios SparkFun Teensy Header Kit
PRT-13925
SparkFun
1:
1,99 €
13 En existencias
50 Pedido
N.º Ref. Mouser
474-PRT-13925
SparkFun
Accesorios SparkFun Teensy Header Kit
13 En existencias
50 Pedido
Comprar
Mín.: 1
Múlt.: 1
Detalles
Accesorios SparkFun Jumper Wires Premium 4 in M/M-26 AWG 30P
PRT-14284
SparkFun
1:
2,41 €
27 En existencias
N.º Ref. Mouser
474-PRT-14284
SparkFun
Accesorios SparkFun Jumper Wires Premium 4 in M/M-26 AWG 30P
27 En existencias
Comprar
Mín.: 1
Múlt.: 1
Detalles
Accesorios SparkFun ESP32 Thing Stackable Header Set
PRT-14311
SparkFun
1:
2,15 €
265 En existencias
N.º Ref. Mouser
474-PRT-14311
SparkFun
Accesorios SparkFun ESP32 Thing Stackable Header Set
265 En existencias
Comprar
Mín.: 1
Múlt.: 1
Detalles
Accesorios SparkFun Large Jumper Wire Kit - 700pcs
PRT-14671
SparkFun
1:
37,18 €
9 En existencias
7 Fecha prevista: 02/09/2026
N.º Ref. Mouser
474-PRT-14671
SparkFun
Accesorios SparkFun Large Jumper Wire Kit - 700pcs
9 En existencias
7 Fecha prevista: 02/09/2026
Comprar
Mín.: 1
Múlt.: 1
Detalles
Accesorios SparkFun Here is a tiny 4-pin Qwiic 1mm JST connector. This connector mounts to allow you to connect your cable vertically great for tight spaces. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device com
PRT-16766
SparkFun
1:
0,659 €
486 En existencias
N.º Ref. Mouser
474-PRT-16766
SparkFun
Accesorios SparkFun Here is a tiny 4-pin Qwiic 1mm JST connector. This connector mounts to allow you to connect your cable vertically great for tight spaces. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device com
486 En existencias
Comprar
Mín.: 1
Múlt.: 1
Accesorios SparkFun This header kit is designed specifically for the larger Teensy 4.1 Teensy 3.6 and Teensy 3.5 development boards offering "stackable" headers with extra-long female pins. When soldered to your Teensy these headers make the board fully compatible w
PRT-17152
SparkFun
1:
1,64 €
116 En existencias
140 Fecha prevista: 01/09/2026
N.º Ref. Mouser
474-PRT-17152
SparkFun
Accesorios SparkFun This header kit is designed specifically for the larger Teensy 4.1 Teensy 3.6 and Teensy 3.5 development boards offering "stackable" headers with extra-long female pins. When soldered to your Teensy these headers make the board fully compatible w
116 En existencias
140 Fecha prevista: 01/09/2026
Comprar
Mín.: 1
Múlt.: 1
Accesorios SparkFun This is a 100mm long 4-conductor cable with 1mm JST termination. It s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from a highly malleable material making it more
+2 imágenes
PRT-17259
SparkFun
1:
1,68 €
439 En existencias
N.º Ref. Mouser
474-PRT-17259
SparkFun
Accesorios SparkFun This is a 100mm long 4-conductor cable with 1mm JST termination. It s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from a highly malleable material making it more
439 En existencias
Comprar
Mín.: 1
Múlt.: 1
Detalles
Accesorios SparkFun This is a simple and easy to use battery box for powering the micro:bit Board. It accepts two AAA batteries and plugs directly into the board via a JST Connector.
PRT-24509
SparkFun
1:
3,87 €
6 En existencias
N.º Ref. Mouser
474-PRT-24509
SparkFun
Accesorios SparkFun This is a simple and easy to use battery box for powering the micro:bit Board. It accepts two AAA batteries and plugs directly into the board via a JST Connector.
6 En existencias
Comprar
Mín.: 1
Múlt.: 1
Accesorios SparkFun Here for all your mechatronic needs is a simple high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min.A standard 3-pin power and control cable is attach
ROB-09347
SparkFun
1:
17,93 €
23 En existencias
N.º Ref. Mouser
474-ROB-09347
SparkFun
Accesorios SparkFun Here for all your mechatronic needs is a simple high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min.A standard 3-pin power and control cable is attach
23 En existencias
Comprar
Mín.: 1
Múlt.: 1
Accesorios SparkFun The DG01D-E is a single hobby motor with a hall speed encoder. This motor requires a voltage between 3-9V has a gearbox ratio of 1:48 and a speed of 90RPM at 4.5V. The voltage between positive and negative is determined according to the power supply
ROB-16413
SparkFun
1:
11,35 €
20 En existencias
N.º Ref. Mouser
474-ROB-16413
SparkFun
Accesorios SparkFun The DG01D-E is a single hobby motor with a hall speed encoder. This motor requires a voltage between 3-9V has a gearbox ratio of 1:48 and a speed of 90RPM at 4.5V. The voltage between positive and negative is determined according to the power supply
20 En existencias
Comprar
Mín.: 1
Múlt.: 1
Accesorios SparkFun This straight bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of the st
SEN-13329
SparkFun
1:
12,99 €
102 En existencias
N.º Ref. Mouser
474-SEN-13329
SparkFun
Accesorios SparkFun This straight bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of the st
102 En existencias
Comprar
Mín.: 1
Múlt.: 1
Accesorios SparkFun Load Cell - 200kg, S-Type (TAS501)
SEN-14282
SparkFun
1:
94,81 €
5 En existencias
N.º Ref. Mouser
474-SEN-14282
SparkFun
Accesorios SparkFun Load Cell - 200kg, S-Type (TAS501)
5 En existencias
Comprar
Mín.: 1
Múlt.: 1
Detalles
Accesorios SparkFun The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power high-g accelerometer with I2C and SPI interface options. Though not necessarily good at detecting minute changes the H3LIS331DL is great for grueling conditions that normal a
SEN-14480
SparkFun
1:
15,96 €
31 En existencias
63 Fecha prevista: 08/09/2026
N.º Ref. Mouser
474-SEN-14480
SparkFun
Accesorios SparkFun The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power high-g accelerometer with I2C and SPI interface options. Though not necessarily good at detecting minute changes the H3LIS331DL is great for grueling conditions that normal a
31 En existencias
63 Fecha prevista: 08/09/2026
Comprar
Mín.: 1
Múlt.: 1
Detalles
Accesorios SparkFun The AT42QT1011 Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use digital I/O pins.The AT42QT1011 is a dedicated, single-button capacitive sense chip. The chip handles monitoring a conductive area for touch.
SEN-14520
SparkFun
1:
4,51 €
79 En existencias
N.º Ref. Mouser
474-SEN-14520
SparkFun
Accesorios SparkFun The AT42QT1011 Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use digital I/O pins.The AT42QT1011 is a dedicated, single-button capacitive sense chip. The chip handles monitoring a conductive area for touch.
79 En existencias
Comprar
Mín.: 1
Múlt.: 1
Detalles
Accesorios SparkFun This miniature straight bar load cell (sometimes called a strain gauge) can translate up to 100g of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional
SEN-14727
SparkFun
1:
12,47 €
29 En existencias
74 Pedido
N.º Ref. Mouser
474-SEN-14727
SparkFun
Accesorios SparkFun This miniature straight bar load cell (sometimes called a strain gauge) can translate up to 100g of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional
29 En existencias
74 Pedido
Comprar
Mín.: 1
Múlt.: 1
Detalles
Accesorios SparkFun Load Cell - 5kg, Strght Bar(TAL220B)
SEN-14729
SparkFun
1:
15,94 €
54 En existencias
34 Pedido
N.º Ref. Mouser
474-SEN-14729
SparkFun
Accesorios SparkFun Load Cell - 5kg, Strght Bar(TAL220B)
54 En existencias
34 Pedido
Comprar
Mín.: 1
Múlt.: 1
Detalles
Accesorios SparkFun The SparkFun Photodetector Breakout is an updated version of the SparkFun Particle Sensor Breakout which includes the MAX30101 a highly sensitive optical sensor that succeeds the MAX30105 and MAX30102. The MAX30101 Breakout utilizes a photodio
360°
+6 imágenes
SEN-16474
SparkFun
1:
32,63 €
4 En existencias
38 Fecha prevista: 16/10/2026
N.º Ref. Mouser
474-SEN-16474
SparkFun
Accesorios SparkFun The SparkFun Photodetector Breakout is an updated version of the SparkFun Particle Sensor Breakout which includes the MAX30101 a highly sensitive optical sensor that succeeds the MAX30105 and MAX30102. The MAX30101 Breakout utilizes a photodio
4 En existencias
38 Fecha prevista: 16/10/2026
Comprar
Mín.: 1
Múlt.: 1
Accesorios SparkFun Always always always wear eye protection while soldering. This is a golden rule we all know but sometimes overlook. Luckily with these SparkFun Safety Glasses you'll have a pair of lightweight economical and stylish lenses to protect your precio
SWG-11046
SparkFun
1:
4,39 €
12 En existencias
N.º Ref. Mouser
474-SWG-11046
SparkFun
Accesorios SparkFun Always always always wear eye protection while soldering. This is a golden rule we all know but sometimes overlook. Luckily with these SparkFun Safety Glasses you'll have a pair of lightweight economical and stylish lenses to protect your precio
12 En existencias
Comprar
Mín.: 1
Múlt.: 1
Accesorios SparkFun This is a solderer's best helper the third hand. Comes with a heavy base two alligator clips a soldering iron holder and a good magnifying glass. Note that we don't normally need a third hand. It's nice but soldering flat on a table works just f
TOL-09317
SparkFun
1:
14,26 €
7 En existencias
20 Pedido
N.º Ref. Mouser
474-TOL-09317
SparkFun
Accesorios SparkFun This is a solderer's best helper the third hand. Comes with a heavy base two alligator clips a soldering iron holder and a good magnifying glass. Note that we don't normally need a third hand. It's nice but soldering flat on a table works just f
7 En existencias
20 Pedido
Comprar
Mín.: 1
Múlt.: 1
Accesorios SparkFun You can tell by our large assortment of tweezers that we here at SparkFun are way into picking up tiny things. To make sure we're always up to date on the latest in 'tweezing' technology we're always buying and testing new tweezers. Okay... tweezers
TOL-10602
SparkFun
1:
4,09 €
62 En existencias
N.º Ref. Mouser
474-TOL-10602
SparkFun
Accesorios SparkFun You can tell by our large assortment of tweezers that we here at SparkFun are way into picking up tiny things. To make sure we're always up to date on the latest in 'tweezing' technology we're always buying and testing new tweezers. Okay... tweezers
62 En existencias
Comprar
Mín.: 1
Múlt.: 1