Marki Microwave Dispositivos de RF e inalámbricos

Tipos de dispositivos de RF e inalámbricos
Cambiar vista de categoría
Resultados: 589
Seleccionar Imagen Número de referencia
 Fabr.
Descripción Hoja de datos Disponibilidad Precio (EUR) Filtre los resultados de la tabla por precio unitario basándose en su cantidad.
Cant. RoHS
Marki Microwave Amplificador de RF A wideband low noise amplifier capable of providing 13.5 dB gain and +28 dBm OIP3 with a low 2.7 dB typical noise figure. The AMM-9860PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 25
Múlt.: 25

Marki Microwave Amplificador de RF A wideband low noise amplifier capable of providing 11.7 dB gain and +24 dBm OIP3 with a low 2.5 dB typical noise figure. The AMM-9861PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 25
Múlt.: 25

Marki Microwave Amplificador de RF A wideband gain block capable of providing 10 dB gain and +23 dBm OIP3 with a low 3.4 dB typical noise figure. The AMM-9862PSM is an ideal linear signal amplifier for applications requiring low gain, low power consumption and small form-factors.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 25
Múlt.: 25

Marki Microwave Amplificador de RF The APM-7098SM is a broadband low phase noise LO driver amplifier designed to provide a saturated +23 dBm output power with low DC power consumption.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Amplificador de RF The APM-7099SM is a broadband low phase noise driver amplifier designed to provide a saturated +25 dBm output power with low DC power consumption.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 25
Múlt.: 25

Marki Microwave Amplificador de RF The APM-7516PSM is a broadband low phase noise driver amplifier designed to provide enough power to drive the LO port of an H or L-diode mixer with a range of input powers.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 25
Múlt.: 25

Marki Microwave Atenuadores The ATN00-0040PSM is a surface mount GaAs MMIC 0dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Atenuadores The ATN00-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN00-0070CSP1 features a typical 0.3 dB attenuation with 0.1 dB attenuation flatness and 20 dB return loss across the DC-70 GHz bandwidth.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 1
Múlt.: 1
Marki Microwave Atenuadores The ATN01-0040PSM is a surface mount GaAs MMIC 1dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Atenuadores The ATN01-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN01-0070CSP1 features a typical 1.3 dB attenuation with 0.2 dB attenuation flatness and 23 dB return loss across the DC-70 GHz bandwidth.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 1
Múlt.: 1
Marki Microwave Atenuadores The ATN02-0040PSM is a surface mount GaAs MMIC 2dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Atenuadores The ATN02-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN02-0070CSP1 features a typical 2.1 dB attenuation with 0.1 dB attenuation flatness and 25 dB return loss across the DC-70 GHz bandwidth.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 1
Múlt.: 1
Marki Microwave Atenuadores - interconexiones The ATN03-0040BH is a GaAs MMIC attenuator in an inline connectorized bullet housing package. The ATN03-0040BH provides a nominal 3.5 dB attenuation over a DC to 40 GHz operating range.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Atenuadores The ATN03-0040PSM is a surface mount GaAs MMIC 3dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Atenuadores The ATN03-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN03-0070CSP1 features a typical 3.2 dB attenuation with 0.1 dB attenuation flatness and 22 dB return loss across the DC-70 GHz bandwidth.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 1
Múlt.: 1
Marki Microwave Atenuadores The ATN04-0040PSM is a surface mount GaAs MMIC 4dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Atenuadores The ATN04-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN04-0070CSP1 features a typical 4.1 dB attenuation with 0.2 dB attenuation flatness and 22 dB return loss across the DC-70 GHz bandwidth.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 1
Múlt.: 1
Marki Microwave Atenuadores The ATN05-0040PSM is a surface mount GaAs MMIC 5dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Atenuadores The ATN05-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN05-0070CSP1 features a typical 5.2 dB attenuation with 0.2 dB attenuation flatness and 24 dB return loss across the DC-70 GHz bandwidth.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 1
Múlt.: 1
Marki Microwave Atenuadores - interconexiones The ATN06-00110 is a family of precision GaAs MMIC fixed attenuators. These attenuators are an ideal solution for attenuating a signal and they can be used in a wide range of applications.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Atenuadores - interconexiones The ATN06-0040BH is a GaAs MMIC attenuator in an inline connectorized bullet housing package. The ATN06-0040BH provides a nominal 6.5 dB attenuation over a DC to 40 GHz operating range.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Atenuadores The ATN06-0040PSM is a surface mount GaAs MMIC 6dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Atenuadores - interconexiones The ATN10-0067 is a family of precision GaAs MMIC fixed 6dB attenuators. These attenuators are an ideal solution for attenuating a signal and they can be used in a wide range of applications.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Atenuadores - interconexiones The ATN10-0067 is a family of precision GaAs MMIC fixed 6dB attenuators. These attenuators are an ideal solution for attenuating a signal and they can be used in a wide range of applications.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Atenuadores The ATN06-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN06-0070CSP1 features a typical 6.0 dB attenuation with 0.2 dB attenuation flatness and 22 dB return loss across the operational bandwidth.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 1
Múlt.: 1