Marki Microwave Dispositivos de RF e inalámbricos

Tipos de dispositivos de RF e inalámbricos
Cambiar vista de categoría
Resultados: 589
Seleccionar Imagen Número de referencia
 Fabr.
Descripción Hoja de datos Disponibilidad Precio (EUR) Filtre los resultados de la tabla por precio unitario basándose en su cantidad.
Cant. RoHS
Marki Microwave Mezclador de RF The MM1-0312SSM is a highly linear passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications.
Hoja de datos
25Fecha prevista: 20/03/2026
Mín.: 1
Múlt.: 1

Marki Microwave Mezclador de RF The MM1-0320HSM is a passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications.
Hoja de datos
50Fecha prevista: 10/04/2026
Mín.: 1
Múlt.: 1

Marki Microwave Mezclador de RF The MM1-0626HSM is a passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications.
Hoja de datos
100Fecha prevista: 13/03/2026
Mín.: 1
Múlt.: 1

Marki Microwave Mezclador de RF The MM1-0626SSM is a highly linear passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications.
Hoja de datos
50Fecha prevista: 10/04/2026
Mín.: 1
Múlt.: 1

Marki Microwave Mezclador de RF A broadband passive GaAs MMIC IQ mixer that operates across an unrivaled 2-18 GHz RF/LO band with an IF from DC to 3 GHz. Excellent phase and amplitude balance of the on-chip LO quadrature hybrid leads to typical image rejection of 35 dB.
Hoja de datos
25Fecha prevista: 10/04/2026
Mín.: 1
Múlt.: 1

Marki Microwave Mezclador de RF The MMIQ-0218LSM is a broadband passive GaAs MMIC IQ mixer that operates across an unrivaled 2-18 GHz RF/LO band with an IF from DC to 3 GHz.
Hoja de datos
25Fecha prevista: 10/04/2026
Mín.: 1
Múlt.: 1

Marki Microwave Mezclador de RF The MT3-0113HCQG is a triple balanced passive diode GaAs MMIC mixer offering high dynamic range, low conversion loss, and excellent repeatability.
Hoja de datos
10Fecha prevista: 22/05/2026
Mín.: 1
Múlt.: 1

Marki Microwave Amplificador de RF A high-linearity low noise amplifier capable of providing +23 dBm output power up to 6 GHz. The ADM-8096PSM can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
Hoja de datos
20Fecha prevista: 25/02/2026
Mín.: 1
Múlt.: 1

Marki Microwave Amplificador de RF The ADM-8350PSM is a high-linearity, low noise amplifier capable of providing +22 dBm output power up to 6 GHz. The ADM-8350PSM can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
Hoja de datos
10Fecha prevista: 25/02/2026
Mín.: 1
Múlt.: 1

Marki Microwave Amplificador de RF A small, low power, and economical T3 driver or T3A pre-amplifier. It is a GaAs PHEMT distributed amplifier in a 3mm QFN surface mount package.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 25
Múlt.: 25

Marki Microwave Amplificador de RF A wideband distributed low noise amplifier capable of providing 19 dB gain and +29 dBm OIP3 from DC to 18 GHz and a low 1.7 dB typical noise figure from 4 to 14 GHz.ADM-8344 is available A 4mm QFN and can be supplied from a single positive bias.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 25
Múlt.: 25

Marki Microwave Amplificador de RF The ADM-8475PSM is a high-linearity, low noise amplifier capable of providing 13 dB gain, +26 dBm OIP3 and 2 dB noise figure across a broad 0.5-18 GHz bandwidth.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 25
Múlt.: 25

Marki Microwave Amplificador de RF The ADM-8536PSM is one of the world's smallest 2-20 GHz high linearity, low noise amplifier solution, featuring 10.5 dB gain, +25 dBm OIP3 and 2.5 dB noise figure, making it suitable for use in RF front-ends.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 25
Múlt.: 25

Marki Microwave Amplificador de RF A high-linearity low noise amplifier capable of providing 15.5 dB gain, 2 dB noise figure and +26 dBm OIP3 up to 10 GHz. The amplifier is suitable for use in RF front-ends requiring low noise, high gain and excellent signal fidelity.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Amplificador de RF A high-linearity, low noise amplifier capable of providing 11.5 dB gain and +25 dBm OIP3 across a broad 0.2-20 GHz bandwidth. It's low power consumption, high dynamic range and size make it an ideal choice for RF front end, low SWaP applications.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 25
Múlt.: 25

Marki Microwave Amplificador de RF A high-linearity low noise amplifier capable of providing 18 dB gain, 1.5 dB noise figure and +27 dBm OIP3 from 750 MHz to 8 GHz. It can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Amplificador de RF A wideband distributed low noise amplifier capable of providing 16 dB gain and +25 dBm OIP3 from 2 to 20 GHz and a low 1.8 dB typical noise figure from 8 to 16 GHz.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 25
Múlt.: 25

Marki Microwave Amplificador de RF A wideband distributed low noise amplifier capable of providing 16 dB gain and +24 dBm OIP3 from 10MHz to 26 GHz and a low 2.5 dB typical noise figure from 6 to 20 GHz.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 25
Múlt.: 25

Marki Microwave Amplificador de RF A wideband distributed amplifier capable of providing 14.5 dB gain and +31 dBm OIP3 from 100MHz to 22 GHz. The ADM-9181PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 25
Múlt.: 25

Marki Microwave Adaptadores RF - misma serie The ADPFKFK is a 2.92mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Adaptadores RF - entre series The ADPFVFK is a 2.4mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 or 6 mm fixed wrench recommended.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1
Marki Microwave Adaptadores RF - misma serie The ADPFVFV is a 2.4mm Female to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1
Marki Microwave Adaptadores RF - entre series The ADPFVMK is a 2.4mm Female to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1
Marki Microwave Adaptadores RF - misma serie The ADPMKFK is a 2.92mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Adaptadores RF - misma serie The ADPMKMK is a 2.92mm Male to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1