Marki Microwave Condicionamiento de señales

Resultados: 568
Seleccionar Imagen Número de referencia
 Fabr.
Descripción Hoja de datos Disponibilidad Precio (EUR) Filtre los resultados de la tabla por precio unitario basándose en su cantidad.
Cant. RoHS Modelo ECAD Tipo de producto
Producto
Frecuencia
Rango de frecuencia
Voltaje máximo
Impedancia
Estilo de terminación
Empaquetado / Estuche
Temperatura operativa mínima
Temperatura operativa máxima
Marki Microwave Condicionamiento de señales The T3-20G is a high performance mixer featuring LO/RF from 10 MHz to 20 GHz and IF from 1 MHz to 10 GHz.
Hoja de datos
1Fecha prevista: 21/08/2026
Mín.: 1
Múlt.: 1

Signal Conditioning Mixers 10 MHz to 20 GHz 10 MHz to 20 GHz Connector - 55 C + 100 C
Marki Microwave Condicionamiento de señales The ADM-8344 is a wideband distributed low noise amplifier capable of providing 18 dB gain and +27 dBm OIP3 from DC to 18 GHz and a low 1.4 dB typical noise figure from 4 to 7 GHz.
Hoja de datos
1Fecha prevista: 01/01/2027
Mín.: 1
Múlt.: 1

Signal Conditioning
Marki Microwave Condicionamiento de señales A high-linearity amplifier capable of providing +23 dBm output power up to 6 GHz. The ADM1-8096PC can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
Hoja de datos
1Fecha prevista: 11/12/2026
Mín.: 1
Múlt.: 1

Signal Conditioning
Marki Microwave Condicionamiento de señales A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth.
Hoja de datos
3Fecha prevista: 30/10/2026
Mín.: 1
Múlt.: 1

Signal Conditioning Baluns 200 kHz to 3 GHz 200 kHz to 3 GHz 50 Ohms Connector
Marki Microwave Condicionamiento de señales A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
Hoja de datos
16Pedido
Mín.: 1
Múlt.: 1

Signal Conditioning Baluns 200 kHz to 6 GHz 200 kHz to 6 GHz 50 Ohms
Marki Microwave Condicionamiento de señales The BAL-0026 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 26.5 GHz bandwidth.
Hoja de datos
5Pedido
Mín.: 1
Múlt.: 1

Signal Conditioning Baluns 300 kHz to 26.5 GHz 300 kHz to 26.5 GHz 50 Ohms Connector
Marki Microwave Condicionamiento de señales The BAL-0036 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 36 GHz bandwidth.
Hoja de datos
1Fecha prevista: 06/11/2026
Mín.: 1
Múlt.: 1

Signal Conditioning Baluns 300 kHz to 36 GHz 300 kHz to 36 GHz
Marki Microwave Condicionamiento de señales A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
Hoja de datos
8Pedido
Mín.: 1
Múlt.: 1

Signal Conditioning Baluns 200 kHz to 6 GHz 200 kHz to 6 GHz 50 Ohms Connector
Marki Microwave Condicionamiento de señales A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
Hoja de datos
10Fecha prevista: 13/11/2026
Mín.: 1
Múlt.: 1

Signal Conditioning Baluns 500 kHz to 6 GHz 500 kHz to 6 GHz SMD/SMT - 55 + 100 C
Marki Microwave Condicionamiento de señales A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
Hoja de datos
46Pedido
Mín.: 1
Múlt.: 1

Signal Conditioning Baluns 500 kHz to 9 GHz 500 kHz to 9 GHz SMD/SMT
Marki Microwave Condicionamiento de señales The BT-0018 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
Hoja de datos
8Fecha prevista: 11/12/2026
Mín.: 1
Múlt.: 1

Signal Conditioning Bias Tees 50 Ohms Connector
Marki Microwave Condicionamiento de señales The BT-0026SMG is a packaged bias tee featuring excellent insertion loss and superior isolations over a broad 20 MHz to 26 GHz bandwidth.
Hoja de datos
10Fecha prevista: 25/12/2026
Mín.: 1
Múlt.: 1

Signal Conditioning
Marki Microwave Condicionamiento de señales The BT-0035SMG is a packaged bias tee featuring excellent insertion loss and superior isolations over a broad 20 MHz to 35 GHz bandwidth.
Hoja de datos
20Fecha prevista: 01/01/2027
Mín.: 1
Múlt.: 1

Signal Conditioning 10 MHz to 20 GHz 10 MHz to 20 GHz 30 V SMD/SMT - 55 C + 100 C
Marki Microwave Condicionamiento de señales A packaged bias tee featuring excellent insertion loss and superior isolations over a broad 500 kHz to 12 GHz bandwidth.
Hoja de datos
69Fecha prevista: 08/01/2027
Mín.: 1
Múlt.: 1

Signal Conditioning 500 kHz to 12 GHz 500 kHz to 12 GHz 30 V 50 Ohms SMD/SMT - 55 C + 100 C
Marki Microwave Condicionamiento de señales A packaged bias tee featuring excellent insertion loss and superior isolations over a broad 500 kHz to 26 GHz bandwidth.
Hoja de datos
10Fecha prevista: 06/11/2026
Mín.: 1
Múlt.: 1

Signal Conditioning 500 kHz to 26 GHz 500 kHz to 26 GHz 30 V SMD/SMT + 100 C
Marki Microwave Condicionamiento de señales This coupler features a unique air-line construction that simultaneously enables extremely low loss, minimal return loss, and outstanding directivity throughout the entire frequency range to 50 GHz.
Hoja de datos
1Fecha prevista: 23/10/2026
Mín.: 1
Múlt.: 1

Signal Conditioning
Marki Microwave Condicionamiento de señales The CBR16-0003 offers the highest directivity of any standalone 3 GHz bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.
Hoja de datos
3Pedido
Mín.: 1
Múlt.: 1

Signal Conditioning 200 kHz to 3 GHz 200 kHz to 3 GHz Connector
Marki Microwave Condicionamiento de señales A high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-10GHz bandwidth. It offers low insertion loss and excellent return loss from DC through X band and has a typical 1 dB compression point of 11 dBm.
Hoja de datos
229Pedido
Mín.: 1
Múlt.: 1

Signal Conditioning 0 Hz to 10 GHz 0 Hz to 10 GHz 50 Ohms SMD/SMT - 55 C + 100 C
Marki Microwave Condicionamiento de señales The HLM-70CSP2 is a high-linearity GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 70GHz bandwidth. It offers low insertion loss and excellent return loss over a wide operating bandwidth.
Hoja de datos
20Fecha prevista: 29/09/2026
Mín.: 1
Múlt.: 1

Signal Conditioning
Marki Microwave Condicionamiento de señales The MBALH-0R520CSP2 is a GaAs passive MMIC 1:1 balun that features excellent 32 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth. It is footprint compatible with the 1:2 MBAL-0R520CSP2, offering flexibility in system design.
Hoja de datos
50Fecha prevista: 11/12/2026
Mín.: 1
Múlt.: 1

Signal Conditioning Baluns 500 MHz to 20 GHz 500 MHz to 20 GHz SMD/SMT - 55 C + 100 C
Marki Microwave Condicionamiento de señales The MM2-0530L is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530L is available as a wire bondable chip or connectorized SMA package.
Hoja de datos
3Fecha prevista: 31/12/2026
Mín.: 1
Múlt.: 1

Signal Conditioning Mixers Connector - 55 C + 100 C
Marki Microwave Condicionamiento de señales The MMIQ-0205HSM is a miniaturized, surface-mount multi-octave 1.75-5.0 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either upconversion or downconversion.
Hoja de datos
1Fecha prevista: 21/08/2026
Mín.: 1
Múlt.: 1

Signal Conditioning
Marki Microwave Condicionamiento de señales The MMIQ-0416H is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz.
Hoja de datos
1Fecha prevista: 23/10/2026
Mín.: 1
Múlt.: 1

Signal Conditioning
Marki Microwave Condicionamiento de señales The MPD4-0218CSP3 is a small footprint MMIC 2-18 GHz 4-Way power divider/power splitter featuring high 29 dB isolation and low 0.8 dB excess insertion loss in our compact CSP3 chip scale package.
Hoja de datos
117Pedido
Mín.: 1
Múlt.: 1

Signal Conditioning
Marki Microwave Condicionamiento de señales The PBR-0006SMG is a 10 MHz to 6 GHz surface mount high isolation power combiner. This power combiner features a unique hand tuned construction that enables 35 dB typical isolation across the operational bandwidth.
Hoja de datos
10Fecha prevista: 03/12/2026
Mín.: 1
Múlt.: 1

Signal Conditioning Power Combiners 10 MHz to 6 GHz 10 MHz to 6 GHz SMD/SMT