AD7 Thermoset Chip Bonding Epoxy

Chip Quik AD7 Thermoset Chip Bonding Epoxy is designed to bond surface-mount chips and ICs to printed circuit boards (PCBs). The AD7 epoxy has low viscosity and is designed to be dot/line dispensed, allowing large and heavy surface-mount components to be permanently bonded to a PCB during reflow. This application enables two-sided mount reflow without larger chips or ICs coming loose. Curing time ranges from 120 to 180 seconds at the recommended curing temperature range of +190°C to +260°C. The maximum recommended dot size for Chip Quik AD7 Epoxy is 10mm x 10mm x 1mm.

Resultados: 4
Seleccionar Imagen Número de referencia
 Fabr.
Descripción Hoja de datos Disponibilidad Precio (EUR) Filtre los resultados de la tabla por precio unitario basándose en su cantidad.
Cant. RoHS Producto
Color
Chip Quik Dispensadores de líquido y botellas Thermoset Chip Bonding Epoxy (Red) 10g/10cc syringe (Thermal (Heat) Cure Adhesive/Glue)
Hoja de datos
22En existencias
Mín.: 1
Múlt.: 1

Syringes Red
Chip Quik Dispensadores de líquido y botellas Thermoset Chip Bonding Epoxy (Red) 30g/30cc syringe (Thermal (Heat) Cure Adhesive/Glue)
Hoja de datos
34En existencias
Mín.: 1
Múlt.: 1

Syringes Red
Chip Quik Dispensadores de líquido y botellas Thermoset Chip Bonding Epoxy (Red) 5g/5cc syringe (Thermal (Heat) Cure Adhesive/Glue)
Hoja de datos
56En existencias
Mín.: 1
Múlt.: 1

Syringes Red
Chip Quik Dispensadores de líquido y botellas Thermoset Chip Bonding Epoxy (Red) 200g/6oz cartridge (Thermal (Heat) Cure Adhesive/Glue)
Hoja de datos
4En existencias
Mín.: 1
Múlt.: 1

Cartridge Red