Single-Channel Supervisory ICs

Analog Devices Single-Channel Supervisory ICs are ultra-low-current, supervisory ICs that monitor the VCC voltage from 1.7V to 4.85V in approximately 50mV increments. The device asserts a reset when VCC voltage falls below the reset threshold. The reset output remains asserted for the reset timeout period after the VCC voltage rises above the factory-set VCC_TH + VHYS. The Analog Devices Single-Channel Supervisory ICs include a factory-programmable manual reset input (MR) that can be configured to assert a reset when it receives a rising-edge, falling-edge, active-low, or active-high input signal. The MAX16140 / MAX16144 / MAX16156 / MAX16157 feature an open-drain reset output, while the MAX16142 / MAX16146 / MAX16158 / MAX16159 feature a push-pull reset output.

Resultados: 4
Seleccionar Imagen Número de referencia Fabr. Descripción Hoja de datos Disponibilidad Precio (EUR) Filtre los resultados de la tabla por precio unitario basándose en su cantidad. Cant. RoHS Modelo ECAD Tipo Estilo de montaje Empaquetado / Estuche Voltaje del umbral Número de entradas supervisadas Tipo de salida Reinicialización manual Temporizadores de control Conmutación de backup de batería Tiempo de retardo del reinicio Tensión del suministro - Máx Temperatura operativa mínima Temperatura operativa máxima Precisión Serie Empaquetado
Analog Devices / Maxim Integrated Circuitos de vigilancia 300nA, Single Channel Supervisory in WLP 1.378En existencias
Mín.: 1
Múlt.: 1
Bobina: 2.500

Voltage Supervisory SMD/SMT WLP-4 2.2 V 1 Input Active Low, Open Drain Manual Reset No Watchdog No Backup 100 ms 5.5 V - 40 C + 125 C 1.5 % MAX16140 Reel, Cut Tape, MouseReel
Analog Devices / Maxim Integrated Circuitos de vigilancia 300nA, Single Channel Supervisory in WLP 10.000Disponible de fábrica
Mín.: 2.500
Múlt.: 2.500
Bobina: 2.500

MAX16140 Reel
Analog Devices / Maxim Integrated Circuitos de vigilancia 300nA, Single Channel Supervisory in WLP No en almacén Plazo producción 10 Semanas
Mín.: 2.500
Múlt.: 2.500
Bobina: 2.500

Voltage Supervisory SMD/SMT WLP-4 2.2 V 1 Input Active Low, Open Drain Manual Reset No Watchdog No Backup 10 ms 5.5 V - 40 C + 125 C 1.5 % MAX16140 Reel
Analog Devices / Maxim Integrated Circuitos de vigilancia 300nA, Single Channel Supervisory in WLP No en almacén Plazo producción 10 Semanas
Mín.: 2.500
Múlt.: 2.500
Bobina: 2.500

Voltage Supervisory SMD/SMT WLP-4 1.8 V 1 Input Active Low, Push-Pull Manual Reset No Watchdog No Backup 10 ms 5.5 V - 40 C + 125 C 1.5 % MAX16140 Reel