Todos los resultados (1.203)

Seleccione una categoría a continuación para ver las opciones de filtrado y limitar la búsqueda.
Seleccionar Imagen Número de referencia
 Fabr.
Descripción Hoja de datos Disponibilidad Precio (EUR) Filtre los resultados de la tabla por precio unitario basándose en su cantidad.
Cant. RoHS
Marki Microwave Condicionamiento de señales A wideband low noise amplifier capable of providing 24 dB gain and a low 1.3 dB typical noise figure from 6 to 20 GHz. The ADM-8556 is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Condicionamiento de señales The ADM-8558 is a wideband distributed low noise amplifier capable of providing 16 dB gain and +23 dBm OIP3 from 0.005 to 20 GHz and a low 1.8 dB typical noise figure from 7 to 15 GHz.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Condicionamiento de señales A high-linearity low noise amplifier capable of providing 15 dB gain, 2.1 dB noise figure and +27 dBm OIP3 from 300 kHz to 10 GHz. It can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Amplificador de RF A high-linearity low noise amplifier capable of providing 15.5 dB gain, 2 dB noise figure and +26 dBm OIP3 up to 10 GHz. The amplifier is suitable for use in RF front-ends requiring low noise, high gain and excellent signal fidelity.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Condicionamiento de señales A high-linearity, low noise amplifier capable of providing 10.5 dB gain and +26 dBm OIP3 across a broad 0.2-20 GHz bandwidth.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Amplificador de RF A high-linearity, low noise amplifier capable of providing 11.5 dB gain and +25 dBm OIP3 across a broad 0.2-20 GHz bandwidth. It's low power consumption, high dynamic range and size make it an ideal choice for RF front end, low SWaP applications.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 25
Múlt.: 25

Marki Microwave Condicionamiento de señales The ADM-8625PC is a high-linearity low noise amplifier capable of providing 18 dB gain, 1.4 dB noise figure and +29 dBm OIP3 from 750 MHz to 8 GHz.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Amplificador de RF A high-linearity low noise amplifier capable of providing 18 dB gain, 1.5 dB noise figure and +27 dBm OIP3 from 750 MHz to 8 GHz. It can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Amplificador de RF A wideband distributed low noise amplifier capable of providing 16 dB gain and +25 dBm OIP3 from 2 to 20 GHz and a low 1.8 dB typical noise figure from 8 to 16 GHz.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 25
Múlt.: 25

Marki Microwave Amplificador de RF A wideband distributed low noise amplifier capable of providing 16 dB gain and +24 dBm OIP3 from 10MHz to 26 GHz and a low 2.5 dB typical noise figure from 6 to 20 GHz.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 25
Múlt.: 25

Marki Microwave Amplificador de RF A wideband distributed amplifier capable of providing 14.5 dB gain and +31 dBm OIP3 from 100MHz to 22 GHz. The ADM-9181PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 25
Múlt.: 25

Marki Microwave Condicionamiento de señales A high-linearity, high gain, low noise distributed amplifier capable of providing +22dBm output power up to 35 GHz. When driven with an input power of 0 to +5 dBm, it can provide sufficient LO drive to power all H and most S diode mixers to 40GHz.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Condicionamiento de señales A high-linearity amplifier capable of providing +18 dBm output power up to 10 GHz. The ADM1-8095PC can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Condicionamiento de señales A high-linearity amplifier capable of providing +23 dBm output power up to 6 GHz. The ADM1-8096PC can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Adaptadores RF - misma serie The ADPFKFK is a 2.92mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Adaptadores RF - entre series The ADPFVFK is a 2.4mm Female to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 or 6 mm fixed wrench recommended.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1
Marki Microwave Adaptadores RF - misma serie The ADPFVFV is a 2.4mm Female to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1
Marki Microwave Adaptadores RF - entre series The ADPFVMK is a 2.4mm Female to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1
Marki Microwave Adaptadores RF - misma serie The ADPMKFK is a 2.92mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Adaptadores RF - misma serie The ADPMKMK is a 2.92mm Male to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Adaptadores RF - entre series The ADPMVFK is a 2.4mm Male to 2.92mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 6 mm fixed wrench recommended.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Adaptadores RF - misma serie The ADPMVFV is a 2.4mm Male to 2.4mm Female straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 7.1 mm fixed wrench recommended.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Adaptadores RF - entre series The ADPMVMK is a 2.4mm Male to 2.92mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-40 GHz bandwidth. 3/8" torque wrench and 5.5 mm fixed wrench recommended.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Adaptadores RF - misma serie The ADPMVMV is a 2.4mm Male to 2.4mm Male straight angle coaxial adapter. This adapter features low insertion loss and low VSWR across a DC-50 GHz bandwidth. 3/8" torque wrench and 7.1 mm fixed wrench recommended.
Hoja de datos
No en almacén Plazo producción 12 Semanas
Mín.: 1
Múlt.: 1

Marki Microwave Amplificador de RF A low-cost, cascadable broadband InGaP HBT amplifier. This is a general-purpose gain block amplifier which provides high P1dB, high OIP3, and a very small form factor.
Hoja de datos
No en almacén Plazo producción 10 Semanas
Mín.: 25
Múlt.: 25